Kung alam nyo na po ang DOWNGRADER released by davee in PSP community, w/c is possible to downgrade from OFW 6.31 ,6.35 to 6.20.
and TN's 6.20 downgrade to 5.03, malamang interesado kayo dito, at malamang marami sa atin na takot pa rin gawin ito dahil may risk of bricking.
well ito makakatulong sa ating lahat . dahil marami pa rin dito na hindi nakakaalm na may 2 klase ang board ng PSP 3000 w/c is 03g and 04g at maaring maging abono pag nagkamali sa pagdowngrade....
BAGO MAG DOWNGRADE,
HERE is the GUIDE:
PSP 200X (Slim) with TA88-V3:
- Downgrading to OFW 4.20 Impossible
- Downgrading to OFW 4.21 Possible
- Downgrading to OFW 5.00 Possible.
- Downgrading to OFW 5.01 Possible.
- Downgrading to OFW 5.02 Possible.
- Downgrading to OFW 5.03 Possible.
- Downgrading to OFW 5.51 Possible.
- Downgrading to OFW 6.00 Possible.
- Downgrading to OFW 6.10 Possible.
PSP 300X (Slim & Brite) with 03G Module:
- Downgrading to OFW 4.20 Impossible
- Downgrading to OFW 4.21 Impossible
- Downgrading to OFW 5.00 Possible.
- Downgrading to OFW 5.01 Possible.
- Downgrading to OFW 5.02 Possible.
- Downgrading to OFW 5.03 Possible.
- Downgrading to OFW 5.51 Possible.
- Downgrading to OFW 6.00 Possible.
- Downgrading to OFW 6.10 Possible.
- Downgrading to OFW 6.20 Possible.
PSP 300X (Slim & Brite) with 04G Module:
- Downgrading to OFW 4.20 Impossible
- Downgrading to OFW 4.21 Impossible
- Downgrading to OFW 5.00 Impossible.
- Downgrading to OFW 5.01 Impossible.
- Downgrading to OFW 5.02 Impossible.
- Downgrading to OFW 5.03 Impossible.
- Downgrading to OFW 5.51 Impossible.
- Downgrading to OFW 6.00 Possible.
- Downgrading to OFW 6.10 Possible.
- Downgrading to OFW 6.20 Possible.
PSP GO with 05G Module:
- Downgrading to OFW 4.20 Impossible
- Downgrading to OFW 4.21 Impossible
- Downgrading to OFW 5.00 Impossible.
- Downgrading to OFW 5.01 Impossible.
- Downgrading to OFW 5.02 Impossible.
- Downgrading to OFW 5.03 Impossible.
- Downgrading to OFW 5.51 Impossible.
- Downgrading to OFW 6.00 Impossible.
- Downgrading to OFW 6.10 Possible.
- Downgrading to OFW 6.20 Possible.
SO before downgrading check nyo muna board kung nasa listahan ang OFW na possible
DONT KNOW YOUR BOARD MODEL?
USE THIS (signed, runs on OFW)
Sunday, February 26, 2012
[PSP] PRT XMB MOD for 6.XX PRO
 |
Works on all PSP models and must be running 6.XX PRO B before running this app
Readme included
This application lets you customize your XMB, as you see the picture above
-SERVES as FAST RECOVERY
-Auto detect your Firmware version and installs the MOD suited for it
DOWNLOAD
[Tutorial] Downgrade your Psp Go/Psp-3000 OFW 6.35/6.31 to OFW 6.20
[Tutorial] Downgrade your Psp Go/Psp-3000 OFW 6.35/6.31 to OFW 6.20
credits goes to Davee for the downgrader and also to his friends who helped him.
credits to kamenriderpsp for the video on how to downgrade.
Disclaimer: Updating/Downgrading your firmware may cause a "brick" to your unit; Before you start downgrading your unit, always ask yourself if you really need to downgrade and why. I will not be held responsible for any damage or harm done to your unit by using the software provided and downloaded using this guide. This guide is tested using my psp-go (05g) and may work with psp-3000. follow the steps carefully.
credits to kamenriderpsp for uploading this video.
Steps:
1. Download Davee 6.35/6.31 Downgrader To 6.20, copy both "PSP and SRC folders" to your memstick root.
For Psp Go users: copy both "PSP and SRC folders" to your internal memory directory root (ef0:/).
2. Select the appropriate 6.20 official firmware to download:
Download OFW 6.20 for Psp-2000/3000
Download OFW 6.20 for Psp Go
3. After you downloaded your OFW 6.20 updater; copy the "UPDATE" folder to your E:/PSP/GAME folder.
For Psp Go users: copy the "UPDATE" folder to your ef0:/PSP/GAME folder.
4. Make sure that your psp has at least 90% battery charge. Run Davee's downgrader, press X to proceed and wait until it verifies your OFW 6.20 updater installed in your GAME folder and your psp should takes a few seconds and it will load Sony's 6.20 updater.
5. Proceed with the 6.20 update and wait until it finishes. your psp will restart after the after the update and may start with a "BLUE warning message" press circle to fix this problem.
6. Congrats!!! you've successfully downgraded your Psp-3000/Psp Go back to OFW 6.20.
*This procedure tested by me myself and I on my psp 2006 with v3 Ta-088 board.
Sorry i dont have video with my own but its really tested.. and now trying to RUN the 6.20TN-D Permanent Patch...
credits goes to Davee for the downgrader and also to his friends who helped him.
credits to kamenriderpsp for the video on how to downgrade.
Disclaimer: Updating/Downgrading your firmware may cause a "brick" to your unit; Before you start downgrading your unit, always ask yourself if you really need to downgrade and why. I will not be held responsible for any damage or harm done to your unit by using the software provided and downloaded using this guide. This guide is tested using my psp-go (05g) and may work with psp-3000. follow the steps carefully.
Quote:
| 6.35/6.31 -> 6.20 Downgrader By Davee [What does it do?] Allows users who are incontent with their firmware to downgrade to 6.20 using the Sony Updater. [How do I use it?] Copy the "PSP" folder to your PSP. The downgrader is "signed" and can be launched from OFW XMB. You need to copy the 6.20 update to PSP/GAME/UPDATE/EBOOT.PBP and for PSPgo it must be the eflash it is placed on. After setup run the downgrader and follow the onscreen instructions. [What does it technically do?] It uses the utility/power exploit to gain kernel access and reboots into the updater with a special PRX running. This PRX uses the pspdecrypt functionality to decrypt the updater PRX when needed. This allows the updater to boot in the newer firmwares. |
Steps:
1. Download Davee 6.35/6.31 Downgrader To 6.20, copy both "PSP and SRC folders" to your memstick root.
For Psp Go users: copy both "PSP and SRC folders" to your internal memory directory root (ef0:/).
2. Select the appropriate 6.20 official firmware to download:
Download OFW 6.20 for Psp-2000/3000
Download OFW 6.20 for Psp Go
3. After you downloaded your OFW 6.20 updater; copy the "UPDATE" folder to your E:/PSP/GAME folder.
For Psp Go users: copy the "UPDATE" folder to your ef0:/PSP/GAME folder.
4. Make sure that your psp has at least 90% battery charge. Run Davee's downgrader, press X to proceed and wait until it verifies your OFW 6.20 updater installed in your GAME folder and your psp should takes a few seconds and it will load Sony's 6.20 updater.
5. Proceed with the 6.20 update and wait until it finishes. your psp will restart after the after the update and may start with a "BLUE warning message" press circle to fix this problem.
6. Congrats!!! you've successfully downgraded your Psp-3000/Psp Go back to OFW 6.20.
Many thanks to:
jcpantola
ORIGINAL UPLOADER
jcpantola
ORIGINAL UPLOADER
*This procedure tested by me myself and I on my psp 2006 with v3 Ta-088 board.
Sorry i dont have video with my own but its really tested.. and now trying to RUN the 6.20TN-D Permanent Patch...
P505 SOFTWARE UPDATE (AT&T LG Phoenix)
P505 SOFTWARE UPDATE
AT&T LG Phoenix
Preparation
1 - Fully charge the battery.
2 - Save any important data before updating the software on your device; i.e. contacts, images, etc.
3 - Remove the micro SD memory card.
4 - Close all open applications on your computer before proceeding with the update.
5 - Ensure device "Mass storage only" mode is not selected. Application -> Settings -> SD card & phone storage.
2 - Save any important data before updating the software on your device; i.e. contacts, images, etc.
3 - Remove the micro SD memory card.
4 - Close all open applications on your computer before proceeding with the update.
5 - Ensure device "Mass storage only" mode is not selected. Application -> Settings -> SD card & phone storage.
Note:
a. Calling and messaging functions are not available during the update process.
b. The entire upgrade process takes 30 minutes depending on internet connection and pc configuration.
c. The handset is automatically reset during this process.
a. Calling and messaging functions are not available during the update process.
b. The entire upgrade process takes 30 minutes depending on internet connection and pc configuration.
c. The handset is automatically reset during this process.
Ensure Your Driver is Up to Date
In order to connect your phone to your PC, you must download and install the latest driver below to your PC. Please select "Run" when prompted. When you are finished continue to step 2.
Restart Your Computer
Make sure to bookmark this page. When you restart your computer, click on your bookmark to return to this page and install the Mobile Support Tool.
Install the LG Mobile Support Tool
The LG Mobile Support Tool will easily help you update the software for your device. Please select "Run" when prompted.
Connect Device and Start Update
1 - Connect your phone to your PC using the USB cable included with your device.
a. Do not tap "Turn on USB storage" on your phone screen.
b. Do not disconnect the USB cable until the update is complete.
c. If you experience errors, check USB connection or try another port.
b. Do not disconnect the USB cable until the update is complete.
c. If you experience errors, check USB connection or try another port.
2 - Click 'Start Updating' within the LG Mobile Support tool to begin.
a. If your phone software upgrade stops before it has completed, please do not close the update tool and try the update again.
b. The handset is automatically reset during this process.
b. The handset is automatically reset during this process.
3 - When upgrade is complete, turn on your phone and complete phone setup.
For additional support we are here to help through Live Chat or Phone Support.
cu500 unlock done!free software/usb pinout inside
cu500 unlock done by free software
download muna ang
LG unlocker----->UploadMB.com
LG driver------>Download LGUSBModemDriver_ML_WHQL_Ver_4.6_20050829111107194 .exe from Sendspace.com - send big files the easy way
sa walang mga usb ng cu500 eto nman po ang usb pinout!
eto nman po ang finish product!
download muna ang
LG unlocker----->UploadMB.com
LG driver------>Download LGUSBModemDriver_ML_WHQL_Ver_4.6_20050829111107194 .exe from Sendspace.com - send big files the easy way
sa walang mga usb ng cu500 eto nman po ang usb pinout!
eto nman po ang finish product!
ZTE Blade Netphone 701 BRICKED, successfully repaired
|
heto po ang procedure nang pag repair
1. need natin ang DRIVER
2. ilagay ang telepono sa download mode (press and hold both volume control tapos pwer ON)
hindi mag popower-On ang unit pero mapapansin niyo umiilaw yung red sa button na "BACK"
3. ikabit ang cable, kung na install niyo yung driver silipin sa "device manager"
ZTE Handset Diagnostic Interface(DFU) (COMxx) tandaan yung port ng device niyo
4. paki download po ITO at i-extract sa kung saan niyo gusto.
5. run "Flasher.exe" tapos i-click ang "exclamation mark" tapos login kayo ng adminstrator at ang password “ZTEsmt123”
6. sa “SW Directory”, select kayo ng firmware sa loob extracted folder niyo kanina (European Gen1 firmware or Chinese v880 Gen2 firmware). piliin ang tama na ayon sa unit niyo
7. punta sa "option" (sa taas) select port config . set line 1 dun sa com port na nasa device manager tapos press OK
8. Press the purple arrow next to line 1 at hintayin matapos ang flashing. kapag natapos tanggal kabit ng cable pati battery, pag power ON mo pupunta sa "FTM" mode ang unit, kapag hindi ulitin ang proseso ng flashing.
sa bandang ito ang IMEI ng unit ay sira (corrupted), kung hindi sira IMEI dapat mag popower ON na ng normal ang phone.
repair natin IMEI (heto medyo ticky)
1. sa loob ng flasher niyo, open file “channel1.nvm” with HxD, or a hex editor.
2. Go to offset 0x1215 (search niyo 1215 na lang kasi kung 0x1215 di niyo makikita) . The IMEI is stored between offset 0x1215 and 0x121C. You need to read your correct IMEI from behind your battery and enter it here like this:
3. In 0x1215 put the first digit of your IMEI followed by A. For each successive pair of digits, enter the second digit followed by the first digit. For example: and IMEI of 123456789012345 would be recorded at 0x1215 as 1A 32 54 76 98 10 32 54. When done, save this file (same file name po) pero bago niyo isave gawa muna kayo bakcup ng unang file para sure lang.
4. kung saan naka save ang dating "channel1.nvm" dun niyo rin po ilalagay
RESTORE natin yung tamang IMEI
1. power ON unit na naka FTM mode
2. salpak sa PC
3. double check com port para sure
4. In the flasher, select “restore NV” and “RF/BT/IMEI/unLock info”, and press the purple arrow next to line 1. Your IMEI will now be restored to your phone.
after nito kapag nag power-ON kayo mag bo-boot na ang unit sa Clockworkmod
flashing to CM7 na tayo
1. ilagay ang "update-cm-7.0.3-Blade-signed.zip" sa root ng sdcard tapos power ON (nasa clockworkmod na kayo)
2. install zip from sdcard (choose update-cm-7.0.3-Blade-signed.zip)
3. hintaying matapos at reboot ang unit
4. singilin na ang customer (wag na sisihin ang technician na nakadale kawawa naman
) pa pogi point na lang sa customer |
|
Saturday, February 25, 2012
PSVITA Original FIRMWARE
- PSVITA Original FIRMWARE
- PSVITA FIRMWARES:
- .............................
- PSVita Firmware 1.60
- http://zload.net/v2/archives/file/?id=241727
- .............................
- PSVita Firmware 1.52
- http://zload.net/v2/archives/file/?id=241719
- .............................
- PSVita Firmware 1.51
- http://zload.net/v2/archives/file/?id=241713
- .............................
- PSVita Firmware 1.50
- http://zload.net/v2/archives/file/?id=241711
so tool 1.978 [PSP]
D e s c r i p t i o n
= ISO Tool 1.978 has just been updated and release . ISO Tool 1.978 is the latest Homebrew application to be release by PSP Developer Takka who has decided to release this Signed and Unsigned version of his popular homebrew application ISO Tool 1.978 to the homebrew community . IF you are looking for a Homebrew application to help you patch your ISO , Then this cool well done ISO Tool is the perfect homebrew application for you . ISO Tool 1.978 is the latest version of this homebrew application . So if you are using a older version of ISO Tool , Then go ahead and download this latest version ISO Tool 1.978 below . Don’t forget to read the developer statement for more information about the release of ISO Tool 1.978 and it’s features .
Developer Statement
=
[NEW] (Installation media) Koihime Musou 蜀編 Fixed wrong ID
Koihime Musou 蜀編 of Fixed ID was wrong
Other changes are not so if you do not use the software update is not necessary
DOWNLOAD
iso tool 1.978
Installation (this app is for CFW use only)
1. Download .zip file from the link above
2. Extract the file in your computer
3. copy the contents of Iso_tool_cfw folder (not the folder itself , the contents) at the root of your memory stick.
4. Enjoy the rights of a pirate argh!
Credits goes all to takka for creating this great iso_tool 1.978
__________________
Tutorial how to upgrade 3.XX OE to 6.60CFW
Quote:
| I Want to Update my Psp but my current version is 3.XX OE CFW with error "DADADADA" when UPDATING the system version. |
This Tutorial was made for those who doesnt have PANDORA and wants to upgrade/update their PSPs
With this tutorial I will show you how to update your 3.XX OE CFW to a new 6.60 ME CFW.
If you run any OFW updater on the 3.XX OE CFW it will give you an (DADADADA) Error.
|
|
First thing you have to download this archive. OE-CFW Updater
which you put on the PSPs memory stick.
Under GAME FOLDER.
Now you run the 3.52 M33 Updater
|
Press X to start flashing...
|
Press X to shutdown...
|
On it back and check the System Version..
|
Next Run the M33 to Update to install the 3.52 M33-4.
|
Press X to Update...
|
Press X to shudown...
|
Power On and check version again...
|
Run the 3.71M33 Updater..
|
Press X to start...
|
Follow instructions on the screen...
|
|
|
Check version...
|
After installing the 3.71 M33, you are able to install the 6.60 OFW which is needed for the 6.60 CFW
Download this 6.60OFW
And put to your Psps memory stick. Under GAME folder also.
Now to update to 6.60OFW Run...
|
|
|
|
Download 6.60CFW
Copy to your game folder as well.
Now to custumized the firmware
Run the PRT-UPDATE (pro-update)
|
Run the PRT-Recovery (Fast Recovery)...
|
Then lastly Run the CIPL...
|
Press X to install...
|
And here we go!
|
Now running with the latest system version...
Other Usefull Post:
PSP 6.XX PRT CFW (Xmas Edition)
PRT X-mas Project for 6.XX PRT Custom Firmwares PRO B PRT X-mas Edition
ScreenShots For The UPDATERS:
Customized:
Installation & Usage:
-Download links that suits your Model and version
-Extract the downloaded file on root of your memory stick
-Run PRT Updater and to make your OFW a PRT CFW
NOTE: Always put seplugins folder included on extracted files sa root ng memory stick to be able to load the PRT drivers
DOWNLOAD LINKS:
FOR PSP 100X,200X,300X,E100x:
6.20 PRT
6.35 PRT
6.39 PRT
6.60 PRT
FOR PSP GO:
PSP GO 6.20 PRT
PSP GO 6.35 PRT
PSP GO 6.39 PRT
PSP GO 6.60 PRT
CREDITS to TEAM PRO
(originally from 6.xx PRO B10 fix)
ScreenShots For The UPDATERS:
|
|
|
|
Customized:
|
|
|
|
Installation & Usage:
-Download links that suits your Model and version
-Extract the downloaded file on root of your memory stick
-Run PRT Updater and to make your OFW a PRT CFW
NOTE: Always put seplugins folder included on extracted files sa root ng memory stick to be able to load the PRT drivers
DOWNLOAD LINKS:
FOR PSP 100X,200X,300X,E100x:
6.20 PRT
6.35 PRT
6.39 PRT
6.60 PRT
FOR PSP GO:
PSP GO 6.20 PRT
PSP GO 6.35 PRT
PSP GO 6.39 PRT
PSP GO 6.60 PRT
CREDITS to TEAM PRO
(originally from 6.xx PRO B10 fix)
PSP CFW PRO-B10 & 6.XX Downgrader v4.1 PRT Project
Supported Model - PSP 100X PSP 200X PSP 300X and PSP Go
Supported Version - 6.20 OFW 6.35 OFW 6.39 OFW 6.60 OFW
Click This For Download Link
PRO-B10 Shell 1.5 (with Procedure)
|
- Revised and New Look
- PRO-B10 Fix firmwares
- 1-Button copy
- Auto Procedure Pop-Out
How to use:
- connect PSP to USB
- open PRO-B10 Shell v1.5
- select PSP Drive
- click firmware button that you want to copy
NOTE: If you're using a PSP with a custom firmware, be sure that USB DEVICE is set to MEMORY STICK (press select, check setting "USB DEVICE")
CAUTION: This program automatically creates folders and copy files, be sure that your USB DEVICE is set to MEMORY STICK (specially to those who are using Semi-hackable PSPs)
DISCLAIMER: The Author is not liable for any damage or problems made by using this program
PRO-B10 Shell v1.5
Subscribe to:
Posts (Atom)
